September 18th, 2011 | revlimiter.net, Bucky (01 MX-5), DIY
The uber UBER NB gauge install how-to.
After I posted my NA gauge face install, I got a few requests for an NB version. And I wanted to do one of these anyway before I started selling NB gauges in my store.
I proudly present the revlimiter.net NB Miata Gauge Face Install
Complete with CEL relocation...
... in minute detail.
39 pix total on the NB gauge install.
There’s a lot more photos on the NB version. It’s easier to pull the cluster than on an NA, but there’s a bit more work to do once you get it out. And I took pix of everything.
Installed NB gauges.
Go check it out. If you notice any incomplete information, please post a comment below!
« The Store Is Open
| Microshoot: Micro Machines Audi Quattro WRC
[ © 1998-2021 revlimiter.net LLC
Products sold on this site are for Off-road and Competition use only. This website intended solely to provide general guidance on matters
of interest for the personal use of the Reader of this Page, who accepts full responsibility for its use. All products
as well as information provided "as is," with no guarantee of completeness, accuracy, or timeliness, and without
warranty of any kind, express or implied, including, but not limited to, the warranties of performance, merchantability,
and fitness for a particular purpose.