Select Button Type:

All-Black Horn Button Black with Chrome Inner Ring

Details

• High quality custom horn buttons with domed insert.
• Insert composed of vinyl and solar-cell quality polyurethane epoxy.
• revlimiter Horn Buttons work with a wide range of wheels and includes a universal retainer ring.
• Shipping calculated at checkout. US customers receive Priority Mail. International orders will be sent via EMS or Priority International.

Cowboy Bebop Colors:

The Cowboy Bebop horn button comes in holofoil. As light hits it, the text colors change. It can look chrome, rainbow, blue, red, or many combinations in between.

Epic Button:

The revlimiter Epic Horn Button features OEM quality plastic in a satin finish. The inner ring can be either black or chrome depending on the button body you choose. It comes with all you see here - an OEM-quality button, universal horn retainer ring, and extra wiring pigtails to make installation easier. You probably don't need the wires, but they come with the button anyway.



The Epic button makes connections as easy as possible. It can ground through either the strap or the extra included terminals. The signal posts on the epic have two sizes of disconnect to make installation easier on certain Quick Release wheels.



The Epic button fits a Momo wheel just like their OEM option. It is held in place by the retainer ring and all the holes line up.



Fitment in a Nardi with the Epic horn button is quite nice. The entire button fits in the wheel's center hole. The retainer ring holds the button in place and the elongated mounting holes from the Momo pattern are used.



The Epic button even fits a 5 hole steering wheel. It's shown here mounted in a Grant. The universal retainer ring even works for this bolt pattern.

CUSTOM STUFF!

Want something a little different? Hit the custom custom horn page to see what I've made so far.

A Note About Colors

While I try my hardest to photograph each item correctly, I can't guarantee that your computer monitor is accurately showing the actual color of what you will receive. Reds and purples are particularly hard to photograph and have the added problem of becoming richer or thinner depending on the light hitting them.

Be aware that there may be some color differences between what you see on the screen and what your horn button may look like.

FAQ

Q: Can I have matching center cap inserts made?!?!
A: Yes! Each center cap order is a custom one, so you'll need to fill out an email form and chat with me a bit. Check ut the Wheel Center Cap page to read more.

Q: Can I have a matching keychain made?
A: Sure! Keychains can be seen on the revlimiter Keychain Page.

Q: Why does it cost more to change one of the colors?
A: I keep all of the standard colors in stock. To make a single badge with different colors, that requires me to make a whole batch of them up. Making a whole batch up requires time. And I don't have a whole lot of free time lately. I'm sorry, but I have to charge extra for color changes.

Q: Can I order a horn button for my Dodge/Honda/Jeep?
A: Sure! The horn buttons are universal. This is not a Miata-specific item.

Q: Can I order one of the special keychain designs (a tach, rainbow kitty, etc) as a horn button?
A: Absolutely. There's almost no limit to the type of design I can put on a horn button.

About the Ordering Process

Every item in this store is hand-crafted, made one set at a time. Everything is made to your specs. There's no mass production. Because of this, there might be a short delay between placing your order and shipping. Horn buttons usually take a couple days to make and require 48 hours to cure before I can pack and ship. If there's a long wait, I'll contact you via email to inform you of any delays.

California Residents:

California requires the following notice: Horn buttons may contain vinyl and mercury, chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.