revlimiter Gauges - Version Eurobeat NB

Details

• All-plastic, robot-cut gauge face set for all NB Miatas (98-05).
• Gen 3! Digital screen printed. OEM textured surface.
• 6 o'clock tach/speedometer zero position.
• 0-8000 RPM, 0-150 MPH.
• Redline at 7000.
• High beam indicator is retained on the tach face. The CEL indicator is moved one slot over on the speed face.
• Other indicator lights (ABS, HOLD, pass airbag) are eliminated.
• Shipping calculated at checkout. US customers receive Priority Mail. International orders will be sent via EMS or Priority International.
  
  Read the NB Gauge Installation Tutorial

Select your car's max indicated speed:	150 MPH 240 km/h 120 MPH 180 km/h
Select your lighting package:	lit using your OEM/stock bulbs ADD colored bulb covers (+$5) ADD white LED bulbs (+$15)
Select Lighting Color:	Red/White/clear

OR customize this gauge set!

• Custom Gauge Price: $149 + design time
• Modifications are charged on a time-required basis. Usually these requests will add $60 (1 hour) to the base price of the gauges. It just depends on how much you want done and how many hours it will take.
• Completely customizable. Want a different tach/speed rotation? Different font? I can make that happen.
• Check out some of the custom work I've done for other customers.

Go to the Custom Order Form

Day Mode

Eurobeat Gauges - Inspired by the Initial D manga and anime.



The background of each gauge face is from the manga. It's in a slightly dull grey and white just like the page. This allows the bright red and black scale and numbers to be very visible.



The red scale and numbers are printed with gloss clearcoat over top to make them pop. They literally stand out from the background and provide 3D depth to the gauge design.



The NB pictured is from the manga. Each panel was carefully chosen and redrawn to fit the gauge faces.

Night Mode

This demo set uses white LED bulbs. This combo gives the highest quality and most even lighting. I highly recommend the LEDs. The ones I sell dim with the rest of the car's lighting.



White/clear/red lighting shown. This is the only color possible on Eurobeat due to the red numbers/scale in the day-mode.

The Packing List

What You Get:

• One (1) set of genuine revlimiter Gauge faces.
• Bulb condoms or LEDs if ordered.
• Pair of no-glue, push-through needle stoppers.
• Pry tools to remove OEM gauge needles.
• A dry dust cloth.
• Pair of gloves.
• One-sheet installation guidelines.
• Stickers and other goodies.

What You Do NOT Get:

• A full cluster. This is a set of gauge faces only.
• Gauge needles. You will have to re-use your stock needles/pointers.

Please Note:

• While I try my hardest to photograph each gauge correctly, I can't guarantee that your computer monitor is accurately showing the actual color of each gauge. Reds and purples are particularly hard to photograph and have the added problem of becoming richer or thinner depending on the light hitting them.
• Be aware that there may be some color differences between what you see on the screen and what your installed gauges look like.

About the Ordering Process

Every item in this store is hand-crafted, made one set at a time. Everything is made to your specs. There's no mass production. Because of this, there might be a short delay between placing your order and shipping. Gauges usually take a couple days to make. If there's a long wait list, I'll contact you via email to inform you of any delays.

California Residents:

California requires the following notice: Gauges may contain Bisphenol A (BPA), a chemical known to the State of California to cause harm to the female reproductive system. You can be exposed when you install the gauges. Always wear the included gloves and wash your hands after installation. For more information go to: www.P65Warnings.ca.gov/BPA.