Select Button Type:	MOMO-type fitment - 50mm diameter
Select Badge Color:	Kitty-Ass Pink with Chrome Logo

Details

• High quality custom horn buttons with domed insert.
• Insert is the same as the badges - composed of vinyl and solar-cell quality polyurethane epoxy.
• M-type button fits Momo-type steering wheels using a 50mm horn retainer ring (not included).
• Shipping calculated at checkout. US customers receive Priority Mail. International orders will be sent via EMS or Priority International.

M-Type Horn:

The M-Type revlimiter horn buttons are designed to fit Momo-type wheels perfectly. Use the 50mm horn retainer ring that came with your steering wheel. It is not included with your horn button order.



The button has a rotating and offset signal post to help install in confined areas (quick release) and a ground strap that connects to the retainer ring.



The black bezel on your horn button may have some slight scratches. They're not noticable under most light and took me a while to get a good photo of. Some say the slight weathering adds to the vintage charm.

CUSTOM STUFF!

Want something a little different? Hit the custom custom horn page to see what I've made so far.

A Note About Colors

While I try my hardest to photograph each item correctly, I can't guarantee that your computer monitor is accurately showing the actual color of what you will receive. Reds and purples are particularly hard to photograph and have the added problem of becoming richer or thinner depending on the light hitting them.

Be aware that there may be some color differences between what you see on the screen and what your horn button may look like.

FAQ

Q: Can I have matching center cap inserts made?!?!
A: Yes! Each center cap order is a custom one, so you'll need to fill out an email form and chat with me a bit. Check ut the Wheel Center Cap page to read more.

Q: Can I have a matching keychain made?
A: Sure! Keychains can be seen on the revlimiter Keychain Page.

Q: Why does it cost more to change one of the colors?
A: I keep all of the standard colors in stock. To make a single badge with different colors, that requires me to make a whole batch of them up. Making a whole batch up requires time. And I don't have a whole lot of free time lately. I'm sorry, but I have to charge extra for color changes.

Q: Can I order a horn button for my Dodge/Honda/Jeep?
A: Sure! The horn buttons are universal. This is not a Miata-specific item.

Q: Can I order one of the special keychain designs (a tach, rainbow kitty, etc) as a horn button?
A: Absolutely. There's almost no limit to the type of design I can put on a horn button.

About the Ordering Process

Every item in this store is hand-crafted, made one set at a time. Everything is made to your specs. There's no mass production. Because of this, there might be a short delay between placing your order and shipping. Horn buttons usually take a couple days to make and require 24 hours to cure before I can pack and ship. If there's a long wait, I'll contact you via email to inform you of any delays.